Computer Serial Attached SCSI SAS Cable SFF 8087 To SFF 8087 Tinned
Mini Serial Attached SCSI (mini SAS) Internal Cable Assemblies
provide for high speed transmission up to 6 Gbps. It is an ideal
interconnect solution for the growing server and storage market.
Mini SAS are designed to significantly reduce the cable size for
storage systems currently using SAS 4-lane (4x or 4-lanes of data)
and are being widely adopted for next-generation designs.The 36-position internal mini SAS cable assemblies are available in
custom lengths of up to one meter. They are also available in three
standard sideband configurations. Customized sideband
configurations are available upon request.Mini SAS was developed to
support data rates at 6.0 Gbps in order to meet the ongoing
industry requirement for higher speed and greater bandwidths, This
data rate is achieved via the use of high speed differential
signals. One assembly is designed to support up to four channels of transmit and receive.
Mini SAS HD Introduction:
March 2012 began a new Mini SAS HD R & D, and dual-port density
and low-key as a PCIe card support 6 and 12Gbps SAS applications.
The new products, including a connector / card structure and
direct-attach copper cables with SAS 2.1 standard and supports the
latest SAS protocol for high-speed data transmission in a storage
area network (san), data center, switching applications procedures.
Mini SAS HD interconnect is fully compatible with 2.1 and SFF SAS -
8644 industry standards.
Mini SAS HD Cable Introduction:
Mini SAS HD direct-attach cables, can provide 4 x (4 channels) or 8
x (8 Channel) cable plug configurations have been developed for the
easy wire routing. Wire design combines brand cable outlet 4 pairs
double TurboTwin telegraph cable connector backshells, for greater
flexibility and tighter bend radius, the wire can be 4 pair cable.
The two most shielded wire package aluminum foil and copper braid
letter maximize signal integrity and reduce EMI radiation.
In addition, each Mini SAS HD cable incorporates an
industry-compliant eepm signature, allows the host to recognize the
cable and auto-configuration system settings to optimize the
transmission of data signals. One of the key mechanical properties
Mini SAS HD connector cable plug is an enhanced pull-to-release
hooks, spring hooks at La reduces the insertion force to increase
their retention force on the plug with safety and stability. Mini
SAS HD cable must have three sizes (26, 28 and 30 AWG) and a length
from 0.5 to 7M.
Mini SAS to mini sas cable
30AWG Internal Mini SAS 36pin (SFF-8087) Male to Mini SAS 36pin (SFF-8087) Male Forward Breakout Cable - Black
Serial Attached SCSI (SAS) is a high-speed data storage interface
designed for high-throughput and fast data access. Intended
primarily for data storage centers, the SAS interface is backwards
compatible with SATA. This allows the user to mix more expensive,
lower-capacity SAS drives for applications that require faster data
access and higher reliability, with lower-cost, higher-capacity
SATA drives for applications with lower access speed requirements.
Vision carries a full line of quality SAS cables with connectors
for every possible application, both internal and external.
This 1/2 meter long cable uses 30 AWG wires and is intended for
internal use. It has a one 36-pin SFF-8087 male Mini-SAS plug with
locking latch on one end and has one 36-pin SFF-8087 male plugs on
the other, allowing you to connect four SATA drives to an SAS
controller. This is a Forward Breakout cable, meaning that it is
intended to connect to a host/controller on the SAS end and to
drives on the SATA end.
Black PVC Jacket+Blue Aluminum Foil
500mm/0.5M/Customized(other length can enquiry seller)
Tinned Cooper with 30awg
Forward pinout/Forward Breakout
Connection A Type
36-Pin SFF-8087 Male Mini-SAS
Connection B Type
36-Pin SFF-8087 Male Mini-SAS
SAS Connector Type
36P Internal Environment
1. Fully integrated press-fit design of the container, provides a
step placement PCB.
2. Multi-port function added to allow or 4 x 8 x cable is mated
1-by-2 or 1-by-4 integrated connector.
3. Integrated container design can be integrated into the radiator,
allowing hot solutions long-reach, 4.
4. Passive - and active-copper cable options available, the ability
to extend the reach of copper wire and active.
5. 4 x 8 x backshell options and more flexible cable options.
6. Highest-density AOC design, almost double the current density
QSFP + AOCs, allows you to choose to use more ports.
7. Cable is in line with SAS-3 (12 gbp s) (system and optical-mode
capability), InfiniBand * (10 gbp s), Ethernet (10 gbp s) and other
agreements. Meet the next generation as well as many existing
ProLiant DL360 G5, DL360 G5 Base, DL360 G5 Performance, DL365,
DL365 Base, DL365 G5, DL365 G5 Base, DL365 G5 High Efficiency,
DL365 G5 Performance, DL365 Performance